Carl Meek & James Lovett - Build Diary for Westfield
||||||||||||
Wiring


 


Wiring
This section is mostly for my reference!  Seeing as I created the wiring loom by hand, I guess i'd better document it properly!

CAR-ECU Marked with Silver Tape
Connects to 4 pin plug under the fuel regulator

CAR LOOM  -  ECU LOOM   -   PURPOSE

White        Red            Switched 12v
Orange       Blue           Warning Light
Red/White    Green          Ignition/Start Switch
Black/White  Black          Tacho Feed

ENGINE-ECU Marked with Yellow Tape
Connects to the rear of the engine

ECU LOOM   -   PURPOSE

Orange         Intake Air Pressure - Ground
White          Intake Air Pressure - Signal
Purple         Intake Air Pressure - +5v DC
Gray           Water Temp - Signal
Gray/Yellow    Water Temp - Ground
Blue           Oil Pressure
Blue           Gear Position - Neutal
Yellow         Gear Position - Signal
Black          Gear Position - Ground

ENGINE-ECU Marked with Blue Tape
Connects to the injector loom

ECU LOOM   -   PURPOSE

Gray/Yellow    Throttle Pos
Blue           Throttle Pos
Black          Throttle Pos
Green          Intake Air Temperature
Black          Intake Air Temperature
Gray           Injector 1 - Switched
Black          Injector 1 - +12v
Orange         Injector 2 - Switched
Black          Injector 2 - +12v
Purple         Injector 3 - Switched
Black          Injector 3 - +12v
White          Injector 4 - Switched
Black          Injector 4 - +12v

CAR-ECU Marked with Red Tape
Connects to the engine head

ECU LOOM   -   PURPOSE

Gray           Cam Position Sensor
Black          Cam Position Sensor
Orange         Ignition 1 - Trigger
Black          Ignition 1 - +12v
Yellow         Ignition 2 - Trigger
Black          Ignition 2 - +12v
White          Ignition 3 - Trigger
Black          Ignition 3 - +12v
Purple         Ignition 4 - Trigger
Black          Ignition 4 - +12v

CAR-ECU Marked with Brown Tape
Connects to the alternator/crank case

ECU LOOM   -   PURPOSE

Red            Alternator +
Black          Alternator -
Blue           Crank Position Sensor
Green          Crank Position Sensor

Race Technology Connections
What the analog terminals are used for

DEVICE       - PIN           - PURPOSE

Dashboard      Analogue 1      Gear Position
Dashboard      Analogue 2      Fuel Level
Dashboard      Analogue 3      Water Temperature
Dashboard      Analogue 4      Oil Temperature
Data Logger    Analogue 1      Gear Position
Data Logger    Analogue 2      Water Temperature
Data Logger    Analogue 3      Oil Temperature
Data Logger    Analogue 4      Fuel Level


Voltages:
Fuel level 0.229 - 3.60